The RCD 310 is one of the most common Volkswagen radios: a double-DIN CD radio with physical buttons, fitted from the late 2000s into the mid 2010s. If it shows SAFE, it needs the 4-digit code set for that exact unit.
Is it really an RCD 310?
The model name is printed on the front, usually top left: "RCD 310". It has a small display, a volume knob on the left, a tuning knob on the right and six preset buttons. The RCD 210 and RCD 300 look similar, so go by the printed name. All three use the same code process, but every unit has its own code.
It was commonly fitted to the Golf Mk5 and Mk6, Polo 6R, Passat B6 and B7, Touran, Caddy, Scirocco, Tiguan Mk1 and Transporter T5. It's also a very popular second-hand upgrade, so you'll find it in cars that never had one from the factory.
Serial or part number? Reading the RCD 310 label
The label on the casing has several numbers on it, and people often send the wrong one.
- The serial is what you need. It's 14 characters and starts with VWZ, for example VWZ1Z2A1234567.
- The part number starts with digits and has "035" in the middle, for example 1K0 035 186 …. It tells you the radio type, not its code.
- Barcodes and dates on the label can be ignored.
To see the label, slide the radio out with VW release keys: two U-shaped keys go into the four slots on the faceplate until they click. There's no need to unplug it. More help: where to find your radio serial number.
Step 2: get the code
First check the service book wallet for a radio code card whose serial matches your radio. If there isn't one, you can order the code from the serial: £19.99, delivered by email in 1–3 hours on average.
Need your VW RCD 310 code? Original 4-digit code from your VWZ serial: £19.99, 1–3 hours on average, money-back guarantee.
Get my codeStep 3: enter the code
Switch the ignition and radio on. The display shows SAFE, then usually 1000 (some units show 0000). Buttons 1–4 each set one digit: each press adds one, and 9 wraps round to 0.
Worked example: your code is 2508 and the display shows 1000.
| Button | Display starts at | You want | Presses |
|---|---|---|---|
| 1 | 1 | 2 | 1 |
| 2 | 0 | 5 | 5 |
| 3 | 0 | 0 | 0 |
| 4 | 0 | 8 | 8 |
Button 3 needs no presses because that digit is already 0. Check the display reads 2508, then hold OK (on some units the right seek arrow or SCAN) for 2–3 seconds until the radio plays. If your display started at 0000, button 1 needs one more press than the table shows. Our Workshop Manual has a press-count planner for any code.
Moving an RCD 310 to another car
The code stays with the radio for life. Moving it to another car doesn't change it, and the new car's code card (if any) won't work on it. Depending on the car, a garage may also need to code the radio to the car so the speakers and steering-wheel buttons work properly; that's separate from the 4-digit code.
Quick answers
Is the RCD 310 code the same as the RCD 210 or RCD 300 code?
No. Every radio has its own code, set for its serial number. The entry method is the same, but the code isn't.
Does the code change if I move my RCD 310 to another car?
No. The code belongs to the radio's serial, so it stays the same whichever car it's in.
My RCD 310 shows 0000 instead of 1000. Does that matter?
Only for the counting. Each button still adds one per press, so just start from the digits the display shows.
How much is an RCD 310 code?
£19.99 from RadioUnlock, fixed price, delivered by email in 1–3 hours on average, with a money-back guarantee if the code doesn't work.