VW RNS 510 radio code: how to find and enter it

The RNS 510 is Volkswagen's touchscreen sat nav and radio from the Golf Mk5–Mk6 era. It uses the same 4-digit anti-theft code system as the radios.

Is this your radio?

It has a large touchscreen with built-in navigation and usually "RNS 510" printed on the front.

Commonly fitted to Golf Mk5 and Mk6, Passat B6 and B7, Tiguan Mk1, Touran, Scirocco and Transporter T5. Exact fitment varies by year and trim.

Step 1: find the VWZ serial

The code is tied to the radio's serial number, printed on a label on the radio's casing. It's 14 characters and starts with VWZ, for example VWZ1Z2A1234567. Don't use the part number, which starts with digits.

To read it, slide the radio out of the dash. Most units come out with radio release keys; some are held by Torx T20 screws behind a trim panel. There's no need to unplug it. More detail: where to find your radio serial number.

Step 2: get the code

First check the service book wallet for a radio code card whose serial matches your radio. If there isn't one, you can order the code from the serial: £19.99, delivered by email in 1–3 hours on average.

Step 3: enter the code

1. Switch the ignition on and let the unit start up fully. Navigation units can take a little longer to boot, so give it time.
2. An on-screen keypad appears, usually with "Enter code" or a padlock prompt.
3. Tap the four digits, check them on the display, then press OK.

Keep the engine running or a battery charger connected, so the unit doesn't power down halfway through entry.