Home › Guides › Audi A6 radio code: how to find and enter it

Audi A6 radio code: how to find and enter it

Updated · 3 min read

Older Audi A6 radios lock themselves and show SAFE when the battery is disconnected. You need the 4-digit code that matches the AUZ serial on the radio.

Which radio does your A6 have?

ModelYearsFactory radiosCode?
A6 C51997–2004Chorus, Concert, Symphony, Navigation PlusYes, 4-digit code
A6 C62004–2011Mostly MMI (screen with a control knob by the gear lever); some cars have a separate Concert or SymphonyMMI: no 4-digit code
A6 C7 onwards2011 onwardsMMI / MIBNo 4-digit code

If your A6 has an MMI screen and a control knob, the radio is part of the MMI system and doesn't use a 4-digit code in the usual way. A separate radio with buttons and a small display is a code radio.

If your car has a touchscreen that says "Component Protection" rather than SAFE, it's a MIB unit with no 4-digit code. See why MIB radios have no code.

Step 1: find the serial

The code is tied to the radio's serial number, printed on a label on the radio's casing. It's 14 characters and starts with AUZ, for example AUZ1Z2A1234567. Don't use the part number, which starts with digits.

A6 C5 radios come out with Audi/VW radio release keys. Push them in until they click and pull the radio out evenly. The label is on the top or side of the casing. More detail: where to find your radio serial number.

Step 2: get the code

First check the service book wallet for a radio code card whose serial matches your radio. If there isn't one, you can order the code from the serial: £24.99, delivered by email in 1–3 hours on average.

Need your A6 radio code? Original 4-digit code from your AUZ serial: £24.99, 1–3 hours on average, money-back guarantee.

Get my code

Step 3: enter the code

  1. Switch the ignition on and the radio on. The display shows SAFE.
  2. Hold TP and RDS together for about 2 seconds to open the code screen, which usually shows 1000 or 0000.
  3. Set each digit with preset buttons 1–4. Button 1 changes the first digit, button 2 the second, and so on. Each press counts up by one, and 9 wraps round to 0.
  4. Confirm by holding TP and RDS together again for 2–3 seconds until the radio plays.

The exact buttons can differ slightly between versions.

Guides for the radios fitted to the A6: Concert · Symphony and Chorus. Our Workshop Manual has a press-count planner that tells you exactly how many presses each button needs.

Two wrong entries usually lock the radio into SAFE 2 for 60 minutes. If that happens, leave the ignition and radio on for an unbroken hour, then enter the correct code once. See how the SAFE 2 lockout works.

A6 tip: TP and RDS

Most A6 C5 radios open the code screen when you hold TP and RDS together for about 2 seconds, and confirm the same way. Pressing them one after the other doesn't work: press both at exactly the same time.

Quick answers

Does my A6 with MMI need a radio code?

Usually not. MMI systems don't use the 4-digit SAFE code. If your car has a separate radio showing SAFE and an AUZ serial, it is a code radio.

Where is the serial on an Audi A6 radio?

On a label on the radio casing: 14 characters starting AUZ. Slide the radio out with release keys to read it.

How much is an Audi A6 radio code?

£24.99 from RadioUnlock, delivered by email in 1–3 hours on average, with a money-back guarantee.