The Touran is a family car, so its battery gets a hard life with short school runs. When the battery is changed or goes flat, the factory radio shows SAFE and needs the 4-digit code that belongs to it.
Which radio does your Touran have?
| Model | Years | Factory radios | Code? |
|---|---|---|---|
| Touran Mk1 (1T) | 2003–2015 | RCD 200, RCD 300, RCD 310, RCD 500, RCD 510, RNS 300, RNS 310, RNS 315, RNS 510 | Yes, 4-digit code |
| Touran Mk2 (5T) | 2015 onwards | Composition / Discover touchscreens (MIB) | No 4-digit code |
Most Touran radios that ask for a code are from the Mk1. Exact fitment varies by year and trim, and many Tourans have been fitted with a second-hand unit, so always go by the label on the radio, not the car.
Step 1: find the serial
The code is tied to the radio's serial number, printed on a label on the radio's casing. It's 14 characters and starts with VWZ, for example VWZ1Z2A1234567. Don't use the part number, which starts with digits.
Touran radios come out with a pair of VW radio release keys. Push them into the slots on each side of the front until they click, then pull the radio out evenly. The label is on the top or side of the casing; there is no need to unplug it. More detail: where to find your radio serial number.
Step 2: get the code
First check the service book wallet for a radio code card whose serial matches your radio. If there isn't one, you can order the code from the serial: £19.99, delivered by email in 1–3 hours on average.
Need your Touran radio code? Original 4-digit code from your VWZ serial: £19.99, 1–3 hours on average, money-back guarantee.
Get my codeStep 3: enter the code
- Switch the ignition on and the radio on. The display shows SAFE, then usually 1000 or 0000.
- Set each digit with preset buttons 1–4. Button 1 changes the first digit, button 2 the second, and so on. Each press counts up by one, and 9 wraps round to 0. If the display starts at 1000, the first digit already shows 1.
- Confirm by holding the accept button for 2–3 seconds until the radio plays. This is usually OK, SCAN or the right seek arrow.
Touchscreen units (RCD 510, RNS 310, RNS 315 and RNS 510) show an on-screen keypad instead: tap the four digits and press OK.
Guides for the radios fitted to the Touran: RCD 310 · RCD 510 · RNS 510 · RNS 310 / RNS 315 · RCD 200, RCD 210 and RCD 300. Our Workshop Manual has a press-count planner that tells you exactly how many presses each button needs.
Touran tip: the code card is often in the wallet
Tourans are often bought from families who kept the service book wallet. Look for a small card with "Radio code" and a serial on it before you order. Only use it if the serial on the card matches the label on your radio: Touran radios are often swapped, for example an RCD 310 upgraded to an RNS 510.
Quick answers
Does the Touran Mk2 need a radio code?
Usually not. Tourans from 2015 onwards have MIB touchscreen systems, which use Component Protection instead of a 4-digit code. If yours shows SAFE and has a VWZ serial on the label, it is a code radio.
Where is the serial number on a VW Touran radio?
On a label on the radio casing, usually the top or side. It is 14 characters long and starts with VWZ. Slide the radio out with release keys to read it.
How much is a VW Touran radio code?
£19.99 from RadioUnlock, fixed price, delivered by email in 1–3 hours on average, with a money-back guarantee if the code doesn't work.